Phone +49 (0) 8571-922970

Fax: +49 (0) 8571-9229722

Glass Fibre Sleeve

Glass fibre sleeves are suitable for the production of profiles of any kind, as spar or other hollow constructions, whereby with a suitable application process it is guaranteed that the force-absorbing reinforcing fibre of the glass fibre sleeving lies air bubble-free, all over and seamless - thus without loss of strength - also around the edge of the shaping core and is sufficiently impregnated with the resin system used. A 45° angle is optimal for high torsional or shear strength. The diameter of the braided hose can be changed by stretching or compressing, but the fibre angle should ideally be between 30° and 60°. A reinforcement in 0° direction can be achieved with so-called UD threads, which are braided in. Another material can be used for this purpose.

ATTENTION!
On request we can offer you all other dimensions between 0.1mm and 500mm.
The articles listed here are only examples of some dimensions.

Article number     Diameter/45°          Wall thickness     Weight KG/100m         Weight KG/m²
1648                       10                              0,13                       0,67                               0,27 
2216                       20                              0,29                       1,94                               0,39
2711                       30                              0,39                       3,72                               0,48
3501                       50                              0,27                       4,38                               0,34
7315                       100                            0,45                       10,09                             0,43

Article number Diameter/45° Wall thickness Weight KG/100m Weight KG/m²
1648 10 0,13 0,67 0,27
2216 20 0,29 1,94 0,39
2711 30 0,39 3,72 0,48
3501 50 0,27 4,38 0,34
7315 100 0,45 10,09 0,43

Request for call / sample

This website uses cookies.

Privacy Policy

Yes, I accept

No