Carbon braided sleevings are suitable for the production of profiles of any kind, as spar or other hollow constructions, whereby with a suitable application procedure it is guaranteed that the force-absorbing reinforcing fibre of the braided sleeving lies air bubble-free, all over and seamless - thus without loss of strength - also around the edge of the shaping core and is sufficiently impregnated with the resin system used. The diameter of the braided sleeve can be changed by stretching or compressing, whereby the fibre angle should ideally be between 30° and 60°. A 45° angle is optimal for high torsional or shear strength. A reinforcement in 0° direction can be achieved with so-called UD threads, which are braided in. Another material can be used for this purpose. Our carbon hoses are particularly suitable for processing with an epoxy or polyester matrix.
Article number Diameter/45° Wall thickness Weight KG/100m Weight KG/m²
6547 10 0,75 1,5 0,66
2294 20 0,65 2,8 0,66
2774 30 0,7 3,7 0,52
3449 50 0,7 5,2 0,42
4435 100 1 12,7 0,5
|Article number||Diameter/45°||Wall thickness||Weight KG/100m||Weight KG/m²|